4 week return policy
Room size
|
small to large
|
Setup
|
wall mounted
|
Amplifier requirements
|
from 30 watts
|
Max. load
|
130 watts
|
Frequency Response
|
46 Hz - 32 kHz (-10 dB)
|
Weight
|
9.0 kg
|
Over all dimensions (mm)
|
W 175 | H 334 | D 145
|
Of course, the Wall also follows the INKLANG philosophy as a flat wall speaker. It plays up fully even at low volumes and does not become tiring even after hours of passionate listening. It is acoustically designed specifically for its position directly on a wall. For easy installation, its back panel provides recesses for cable management. Depending on the use and mounting height, you can hang it in any direction.
Despite its low construction depth of around 14 cm, the Wall appears completely adult. It reaches a depth of 46 Hz in the listening room, so that a subwoofer is not absolutely necessary. The middle of the sound image, with voices and solo instruments, fills it with an impressive wealth of detail. Up to the artist taking a breath before the first note from the trumpet sounds. For additional depth, for example in home theatre use, simply add the AYERS Sub.
Light-footed and relaxed, the Wall as a flat wall speaker gives your music passion and power. Exceptionally clear and without showing the slightest harshness, voices and cymbals pearl crystal clear from the tweeter. Instruments are placed precisely in the width and depth of your room and appear within reach without any effort - exceptional for a wall speaker.
A special spatial situation is no obstacle to exceptional sound. Design your individual wall speaker right now - for example in your wall color.
The highest demands on the listening experience under special circumstances require first-class know-how. Let's take a professional look at the AYERS Wall - made in Hamburg:
The Wall works with a 15 cm long-throw woofer, the membrane of which is made of fiberglass-reinforced paper and is held in a particularly stable aluminium die-cast basket. Due to its massive drive and a sophisticated crossover layout, the woofer generates an astonishing lower end frequency of 46 Hz despite the small, closed enclosure and actively uses the acoustic effect of the wall for support. The elaborate ventilation of the magnet system via two flanks reduces compression noises in the woofer to a minimum.
At approx. 800 Hz, the high-end silk dome tweeter takes over the musical events at an early stage. Its size of 30 mm and a high-pass filter with an effective filter steepness of 24 dB / octave enable this early transition and relieve the woofer from the midrange radiation. Since woofers bundle the sound radiation more and more with increasing frequency, this early separation from the tweeter is ideal for the spatial representation of the loudspeaker. This makes the sound image almost holographic and also creates a perfect sound image clearly outside the ideal listening position. The precision-coated textile membrane of the tweeter allows excellent high frequency radiation up to over 20 kHz.
The Wall’s crossover was developed using a real data computer-aided simulation and optimized in terms of linearity, phase addition, distortion behaviour of the drivers and the sound that is typical for INKLANG. Based on the calculated structure of the crossover, a Monte Carlo simulation was carried out in step two in order to calculate a reduction in the crossover components with identical results. A lower number of components reduces the losses and enables the cost savings to be invested in higher component quality.
Frequency Response (-10 dB/0°)
|
46 Hz - 32 kHz
|
Max. load (watts)
|
130.0
|
Sensitivity dB (1W/1 m)
|
82.0
|
Nominal Impedance/min. (Ω)
|
4.0/3.3
|
Filter (dB)
|
18 TW/ 18 WF
|
Crossover Frequency
|
800 Hz
|
1 x 152 mm (6.0″) Woofer
|
|
1 x 30 mm (1.2″) Tweeter
|
|
closed
|
|
Single-Wire Terminal for
|
|
max. cross section: 8 mm²
|
|
9.0 kg
|
|
175 x 334 x 145
|
|
0° C up to 40° C
|
|
no proximity to fireplaces / stoves
|
|
no direct sunlight for hours
|
|
Frequency Response (-10 dB/0°)
|
46 Hz - 32 kHz
|
Short term handling (watts)
|
130.0
|
Sensitivity dB (1W/1 m)
|
82.0
|
Impedance nominal/minimum (Ω)
|
4.0/3.3
|
Filter (dB)
|
18 TW/ 18 WF
|
Crossover Frequency
|
800 Hz
|
1 x 152 mm (6,0″) Woofer
|
|
1 x 30 mm (1,2″) Tweeter
|
|
closed
|
|
Single-Wire Terminal for
|
|
max. cross section: 8 mm²
|
|
9.0 kg
|
|
175 x 334 x 145
|
|
0° C up to 40° C
|
|
no proximity to fireplaces / stoves
|
|
no direct sunlight for hours
|
|
Music is more than a pleasant background noise.
To say it in advance, in the service desert of Germany, Inklang is more than just an oasis. [...] The delivery was faster than expected. Very well packed and without any blemish. I could not help it and just put the Ayers Two and put on a record. Wow....what might that sound like when they are properly set up and played in?
Here also the consultation in the run-up to my order (Ayers Three) is to be emphasized. A question is just entered online and not a few minutes later the answer appears. You just have a great feeling how you are perceived as a potential customer, and not somewhere in a waiting loop of a call center sour...
Lautsprecher Manufaktur GmbH
stilwerk Hamburg
Große Elbstraße 68
22767 Hamburg
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
0800 724 238 8
(free inside Germany)
+49 (40) 180 241 100
(foreign Countries)